Tutorial of AUTOOL SDT206 Car Smoke Leak Detector

AUTOOL Upgraded SDT 206 Car Smoke Leak Detector is a professional auto pipe leak detect tool. It will help us position car motorcycles leakage on the pipe systems quickly and exactly, such as Intake System Test, Exhaust Systems Test, Crankcase system test,Car Sealing Test, Fuel Tank System Test, etc. Turbo System Test,Various Pipe Fittings Test.

1.Open the engine cover and hang the detector in the cover.

2.Disconnect the pipe that needs to be connected with a detector. If the pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.

3.Secure this side with proper taper stopple/pipe and connect it with a smoke output tube.

4.Connect detector with DC 12V battery: red with positive, black with negative. Do not connect in a contrary way.

5.Turn on the power switch, and the detector starts to work.

6.In about 3 minutes, the pipe will be filled with smoke. Check the leak points. Please use a headlamp if necessary.

7.After leak detection, please connect well the wires and pipe.

Notes

1.Please do leak detection away from smoke-sensitive parts.

2.Do not run the detector over 8 minutes. It needs interval rest.

3.The detector has a protector. If it exceeds the working limit, it will power off automatically. In this condition, please operate it later.

4.The round part of this detector is with temperature, be careful to avoid scalding injury.

For more detailed tutorials, please subscribe to our YouTube channel.

Leave a Reply

Your email address will not be published. Required fields are marked *