Tutorial of AUTOOL HTS558 Car Engine Carbon Deposition Cleaner

AUTOOL HTS558 walnut powder engine Intake pipe valve clean machine is advanced equipment for pure engine intake carbon deposition. Keeping the engine in health status, make sure the engine provides high-quality power constantly.

1. Open the package, and check if everything well.

2. Please take out the parts and machine, and install them as follows:

  (1) Connect recovery particle pipe with the machine;

  (2) Install the push rod fixing bracket in place with the central unit;

  (3) Install the pushrod with pushrod column;

  (4) Open the lock switches at both ends of the central unit from the upper end,

  and lift the head gently to check if the recovery particle filter is stable;

  (5) Check if the filter moves;

  (6) After inspection, pour walnut sand with outer diameter 0.4-0.8mm into

  the host bucket, 2-4KG particle, preferably not over the height of the sieve;

  (7) Gently mount the head back to the main unit and lock both ends of the

  lock.

  (8) After moving the host to where to use it, connect the compressed air of

  not less than 0.7MPa to the host as positioned.

  (9) Wear safety goggles to prevent splashing and eye hurt.

  (10) Plug into 220V/55Hz power supply.

  (11)Connect recovery particle connector into recovery pipe for cleaning

  (12)Press the power switch. It is recommended to use high-grade sand materials.

  (13)The carbon removal gun is inserted from the injection port on the recycling granule joint, and the carbon removal switch is triggered to start the carbon removal process. To clean different particles in different conditions, please adjust the bottom throttle valve of the carbon gun according to the actual situation to ensure that the firing rate is in the best shape, and ensure that the carbon removal is perfect and does not hurt the particles.

  FAQ

For more detailed tutorials, please subscribe to our YouTube channel.