AUTOOL’s best pipeline EVAP leak tester at present-SDT208

Description：

AUTOOL SDT208 Car Smoke Leak Detector EVAP System Tester—an marvelously professional auto pipes Leak Smoke Tester, in line with the technical specifications of the car repair shop EVAP test. SDT208 dramatically increases efficiency and helps us locate leaks from cars and motorcycles on our piping system within minutes, quickly and exactly, such as EVAP System Test、Intake System Test、Exhaust Systems Test， Turbo System Testing, Crankcase system test，Car Sealing Test, Various Pipe Fittings Test.

AUTOOL SDT 208 Car Smoke Leak Detector Features：

[ Professional EVAP Detection ]： In line with the technical requirements of the car repair shop EVAP test. The SDT208 can detect tiny leak holes up to 0.5mm and has a hold-limit pressure protection function in EVAP mode so as to protect vehicle pipes from damages.

 

[ Unique Design ]：The SDT208 is equipped with two pressure control modules, respectively, Standard Mode and EVAP Mode. And two independent switches (Air &Smoke), which can be used for a wide range of leak detection needs, are provided with three gauges, including Oil Level, Air Flow & Air Pressure, for accurate data display.

 

[ Wide Range of Application ]：It supports 12V/24V car batteries. For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats boats. Suitable for all car models.

 

[ Operation Safety ]：The SDT208 owns high-temperature protection and hold-limit pressure. During operation, if the equipment senses the temp. Above 75°C, the power supply will be automatically powered off. If the air pressure exceeds the Standard mode (35psi) /EVAP mode (10psi), the air pump will stop working. This effectively ensures the safety of operators and equipment.

 

[ 3-YEAR WARRANTY ]：For damage caused by non-human factors, we promise to resend parts for free within three years. For any needs, you are warmly welcomed to contact us, and we will get back to you ASAP within 24 hours.

 

Caution：

1. Standard Mode and EVAP Mode can NOT be turned on at the same time.

2. When you use this AUTOOL SDT208 Car Smoke Leak Detector EVAP System Tester for the first time, fill it with 10ml oil. Please be careful NOT to beyond this range.

3. The testing liquid: both liquid paraffin and baby oil are OK.

4. Fresh oil can be filled only when the smoke gets thin, and it can’t be filled over 20ml each time.

5. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.

6. During the process of leak detection, please keep away from smoke-sensitive parts.

7. Do NOT run the detector over 8 minutes continuously. It needs interval rest.

8.The detector has an intelligent protector during operation if the equipment senses the temp. Above 75°C, the power supply will be automatically powered off.

9. The round part of this detector has temperature; please be careful to avoid burns.

10. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.

This is a video about SDT208, more great videos are available on our YouTube channel.