6 tips for saving fuel

The air intake system must be kept clean and unobstructed. The air filter element must be blown frequently, the tightness of the connecting belts must be appropriate, the tire pressure must not be too low, and the gap between the shoes must be adjusted frequently without friction.

The temperature of the engine is directly related to fuel-saving, and the temperature is too high or too low will lead to an increase in fuel consumption. The engine working water temperature should be kept between 80℃-90℃. When the engine is started under low-temperature conditions, it is necessary to warm up, and the engine warms up to warm up, which can save fuel.

The starting quality of the engine before the start of the vehicle is directly related to fuel consumption. The more the number of start, the more the empty fuel consumption. Therefore, improving the starting quality is an important part of saving fuel. The start and acceleration of the vehicle after starting have a certain impact on fuel saving. The car starts smoothly and accelerates evenly, which is more fuel-efficient than a sudden start and abrupt acceleration. In order to save fuel in starting and speeding up, the vehicle should be resisted when starting, and the fuel should be stably refueled. Don’t step on the accelerator so as not to cause a loss of fuel. The clutch should be very accurate, and the throttle control should be moderate so that you can start smoothly and naturally and accelerate evenly. This can save fuel and reduce mechanical wear.

The economic speed is the lowest speed of fuel consumption when the car is in direct gear or Overspeed gear. The car runs on the same road, the speed is different, and the fuel consumption is also different. Therefore, only when driving at a certain speed, the fuel consumption is the lowest. Therefore, the car should use the direct gear or the high gear to drive at a medium speed, which can save fuel consumption.

Gear selection and shift actions have a great influence on fuel consumption. When starting, you should choose gears reasonably according to load capacity and road conditions. In driving, when you feel that the power is insufficient, you should downshift in time, and you should not just increase the throttle to solve the lack of power. Blindly stepping on the throttle will increase fuel consumption. When shifting gears, move lightly and quickly, and move accurately. In this way, the distance traveled by the vehicle during gear shifting can be shortened to achieve the goal of fuel-saving.

Use the ramp to slide; when the slope is not large, and safety is guaranteed, you can use the down ramp to do a proper taxi, which can also save fuel. According to the needs of decelerating or stopping during driving, the distance to the eye side is accurate, and the accelerator pedal is released in advance in a predictable manner, and the purpose of decelerating or stopping is reached by sliding.

In short, to be a qualified and fuel-efficient driver while keeping the vehicle in good condition, he also maintains a good personal attitude and drives the vehicle without emotions. Under the premise of ensuring safety, control the accelerator and vehicle speed under your feet.