XTUNER E3 V8.2 WINDOWS 10 Wireless OBDII Diagnostic Tool

XTUNER E3 WINDOWS 10 Wireless OBDII Diagnostic Tool Pefect Replacement For VPECKER Easydiag

Top 10 Reasons to Buy XTUNER E3:

Diagnosis Service System (DSS)

● Extensive vehicle coverage for more than 78 brands worldwide including American, European, Asian, Australian and Chinese vehicle makes.
● Powerful multiple functions like real time data, ECU programming and so much more.
● Unparalleled OBDII supporting capability for all 5 OBDII protocols and 10 testing modes.

XTUNER E3 Vehicle Coverage
US domestic: CHRYSLER, FORD, GM, JEEP, SCION, etc.

European: ABARTH, ALFA, ASTON, AUDI, BENTLEY, BENZ, BMW, BUGATTI, CITROEN, DACIA, FERRARI, FIAT, FORDEU, JAGUAR, LAMBORGHINI, LANCIA, LANDROVER, MASERTI, MINI, OPEL, PEUGEOT, PORSCHE, RENAULT, SAAB, SEAT, SKODA, SMART, VAUXHALL, VOLVO, VW, etc.

Asian: ACURA, ASIAGM, DAEWOO, DAIHATSU, HONDA, HYUNDAI, INFINITI, ISUZU, KIA, LEXUS, MAZDA, MITSUBISHI, NISSAN, PERODUA, PROTON, SSANGYONG, SUBARU, SUZUKI, TOYOTA, etc.

Australian: HOLDEN and FORD (AUSTRALIA).

China: BYD, CHANGAN, CHANGHE, CHERY, EMGRAND, ENGLON, FOTON, GEELY, GLEAGLE, GWM, HBSH, HUACHEN, LIFAN, WULING, YUAN, etc.

XTUNER E3 OBDII vehicle: CHRYSLER, FORD, GM, TOYOTA, LEXUS, HONDA, HYUNDAI, KIA, MAZDA, MITSUBISHI, NISSAN, SUBARU, SUZUKI, ABARTH, ASTON MARTIN, BUGATTI, FERRARI, LAMBORGHINI, MASERTI, BENZ, BMW, VW, AUDI, SEAT, SKODA, PORSCHE, JAGUAR, LANDROVER, VOLVO, SAAB, ALFA, etc.

XTUNER E3 System Coverage:

Drive: CDI, HFM, ECM, ETC, FTC, FCVT, GRM, ACS, ESM, DF, VG Transfer case, VGS, FSCU, HAQ, HSG, IFI, ISM, PTCU, SCR, SEQ, SGR, etc.
Chassis: ABC, ABR, ABS, ADS, AIRMATIC, AMG DRVU, ASR, BAS, DIF, DTR, EFB, EHPS, ENR, EPS, ES, ESP, RBS, SBC, SPS, TPC, VP, etc.
Body: AAG, AAM, Airbag, ACL , AGS, AHE, AIRSCARF, AIS, ALWR, AMG DRVU, APS, ASD, ATA, BCG, BCM, BS, CCM, CGW, CL, CRN, DAS, DC, EAM, EDW, EIS, EZS, GTO, HBF , HKS, HLCMHRA , IRS, KE, KG, LCP, Lighting, MSC, OBF, OCP, SAM , PSD, PSE, PTS, Rear SAM, RFL , RLS, RS, RVC, SAM, SCCM, SD, SDE, SEM, SG, SRS, SVMCM, UCP, VBF, VR, WBS, WSP , WSS, XALW , etc.
Seats and Doors: AIRSCARF, CL, DCM, DCU, DS, DSP, ERA, ESA, ESD, HRS, HS, LAE, LDCA, MKL, MKS, OSB, PESA, PPAMKS, PWC, RCM, REDC, ESE, RWT, STL , SVS, TLC, etc.
Air Conditioning: Air conditioning, Automatic heater, C-AAC, HBF, HEAT/TAC, HSW, HZR, KBE, PTC, REAR, SG-EM, STH, TAC, ZHE Auxiliary heater, ZHZ Heater booster, etc.
Information and Communication: AGW, APS, ASSYST, AUDIO, AVE, BA, CDC, CD changer, CM, CTEL, DN, Drive Kit Plus, DSI, DTC, GPS box, HFS, IC, ICM, KOMO, Left rear screen, MB Portal, E-mail, Mercedes, MIF, MTCO, NAV, NSA, PTS, Radio, RFK, SCM, TB, TPAD, UC, UHI,? VCS, WSP, ZAN, etc.
Recreational Vehicles: Warm air stationary heater, Elector hydraulic pop, Sliding roof in pop, Voltage supply, Interior lighting, etc.
Special Bodies: PSM, Kerstner, PSM, etc.
Driver Assistance System: 360 camera, DTR, IRS, KAB, MFK, NSA, PARK, PTS, RFK, SG, TPM, etc.

XTUNER E3 Feature

Extremely easy-to-use with touch-screen operation and intuitive operation in the windows.
Support online DTC query, Oline dictionary, data manager and data sharing, quick remote diagnosis.
Support data reference value mode, professional wavefrom display, instrument DIY funciton, and data stream analysis.
Can check out the year and model of the vehicles automatically and quickly, support read and write VIN.
One key update/logging/quick test/test report/feedback functions.
Extensive vehicle coverage for more than 70 US domestic, European, Asian, Australian and Chinese vehicles makes, and more makes covered to 2016 or 2017.
Powerful diagnostic basic functions and Resetting.
Support multiple language, more than 22 languages all over the world.
Wi-Fi internet capability allows for wireless access throughout the workshop.
Unparalleled OBDII functionalities: support all 5 OBD-II protocols and all 10 test modes, support all OEM defined faults.
Hardware architecture uses a new design with multiple protection,interference and stability. Built-in over-voltage protection module is applied,in order to protect scanner and vehicle against accidental damage during checking.
Can work stably in high and low temperature environment, and work well.

XTUNER E3 Function List

Quick Test, Read ECU Info., Read DTCs, Erase DTCs, Clear learning value, Data Stream, Actuations, Read freeze frame data, Read/Write VIN, Basic Reset, Control unit adaptations, Throttle adaptations, Air bleeding, Level calibration, Theft alarm Reset, Key programming, Oil change, Idle speed learning, Idle speed Adjustment, Ignition timing adjustment, Camshaft timing control learning, Maintenance functions, ECU Initial startup, ECU initialization, etc

Expert Service System (ESS)
Expert service system, according to customers’ requirement list, focus on special functions such as Oil change, Idle speed learning, Idle speed Adjustment, Air bleeding, Level calibration, Throttle adaptations, Steering Angle Sensor Calibration, EPB Reset, DPF Reset, ECU Initial startup, ECU initialization, etc.

Maintenance Service System (MSS)
Maintenance service focus on daily maintenance special functions, such as Oil reset, EPB, TPMS, ABS BLEEDING, DPF, ETS, BATTERY, INJECTOR.

XTUNER E3 Hardware Overview:


 

XTUNER E3 Update Information:

Xtuner E3 + (E3 PRO) Release!!!

1. Modified many details of the interface, better user experience than before.
2. More united and vivid color, provide better overall visual effect.
3. Improved the proportion of the home screen, make a generous and beautiful interface.
4. Added drop-down menu, users can quickly and easily enter the relevant function interface.
5. Optimized Wifi connection.
6. Fixed the bug in multi-language display.
 

Operating System                                           Windows XP/7/8/10
Processor                                                          ARM 32-bit Cortex processor
Communications                                             802.11 b/g Wireless LAN
Input Voltage                                                     DC 8-16V
Operating Temperature                                 -10 to 70 °C (14-158°F), Relative Humidity:<90%
Storage Temperature                                     -30 to 120°C (-22 to 248°F), Relative Humidity:<90%
Communication model                                   Wi-Fi or Blue tooth
Dimension                                                         150mm (5.91”) * 94mm (3.70”) * 40mm(1.57”)
Unit Weight                                                        NW:0.07kg (0.154lb) GW:0.166kg (0.366lb)
Protocols                                                            UDS,ISO 9141-2, K/L lines, SAE-J1850 VPW,SAE-J1850 PWM,CAN ISO 11898 ISO 15765-4, High speed, Middle
                                                                              speed ,low speed and Single wire CAN,SAE-J1939,SAE-J1708,SAE-J1587
XTUNER E3 Running Requirement:

CPU speed:                            more than 1.0G Hz
Memory:                                   more than 1GB
Disk:                                         more than 32 GB
Communication port:            Wi-Fi or Bluetooth
OS:                                            Windows XP,Windows 7,Windows 8,Windows 10

1pc x XTUNER E3 VCI
1pc x Packing Box
1pc x String
1pc x Quick Start Guide
1pc x Password Envelope